Shopprimers
A shopprimer may be described as a quick drying material applied as a thin film to a metal surface after cleaning (e.g. blast cleaning) to give protection in the period before and after fabrication.
Muki EPS applied on steel beams in a shoppirmer plant

Find which shopprimer to use based on the required cutting and welding properties:



Muki Z 2001
  • Optimum cutting and welding
  • Low zinc content
  • Two pack - silicate solution and zinc paste
  • 30% by weight of zinc in dry film
  • 24 hours pot life - depending on temperature
Muki Z 3000
  • Good cutting and welding
  • Medium zinc content
  • Two pack - silicate solution and zinc paste
  • 50% by weight of zinc in dry film
  • 24 hours pot life - depending on temperature
Muki AC
  • Good cutting and welding, water borne
  • Iron oxide pigmented
  • One component acrylic
  • Combining 3–5 months corrosion protection with improved health, safety and environmental properties (VOC 97 g/litre)
Muki EPS
  • Fair cutting and welding
  • Iron oxide pigmented
  • Two pack epoxy
  • A multi-functional quick drying primer serving 3 functions:
    • traditional shopprimer (20 microns)
    • primer applied in the shopprimer plant (35-40 microns)
    • holding primer applied with traditional air less spray equipment (20-40 microns).
  • 24-36 hours pot life - depending on temperature
Other Jotun shopprimers
    Muki PVB 1-pack
    Muki PVP 2-pack
Go to Marine Coatings > Areas of activity > Newbuilding
Go to Marine Coatings > Products
Go to Protective Coatings > Products
CONTACT US

Find your local Jotun office:

CERTIFICATES
GENERAL INFORMATION
Email this page Add to favorites  
© Copyright 2017 Jotun. All rights reserved.